CLAMPS, FIXTURES AND VISES

All Vision accessories are designed and crafted in our in-house machine shop. Here at Vision, we turn blocks of metal into necessary and helpful tools for your business. Our clamps, fixtures and vises are created to make your job easier by making your Vision engraving system even more efficient. Many of the fixtures are used in conjunction with our Versa Vise or Quick-Lock Vise that makes it easier to switch items.

MULTI MAT

Multi Mat eliminates the need for double stick tape, clamps, vacuum tables, and most other hold down methods on many engravable items. Multi Mat will hold most types of engraving stock, including brass, aluminum, plastic, and acrylic. Just press it into place on any size engraving table and you’re ready to go, and because Multi Mat is produced with a special rubber coating on both sides, it cleans easily for extended use.

PEN ROTARY ATTACHMENT

 Now you're not just limited to engraving lengthwise on your pens, cigar holders, miniature baseball bats or other cylindrical items…with the PEN ROTARY ATTACHMENT, you can engrave around the entire circumference! Compatible with the Vision 1612, 1624, 2424, 2448, 2525 and 2550, it can hold items up to 1.25" in diameter and up to 7" in length.

WEDGE CLAMP

Simply slide the clamp onto the T-slot table surface and position it over the edge of the engraving stock. The downward clamping force eliminates bowing and problems. This clamp can be used with material up to 1/4” thick. Fits all Vision T-slot tables.

EDGE CLAMP

This clamp is designed to secure engraving materials from the top surface and avoids bowing in most applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the clamp and tightening a thumbscrew. Fits all Vision T-slot tables.

CORNER CLAMP

This clamp is designed to hold down square or rectangular plates. By lining up the “V” cut-out of the clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will accommodate material as thin as 1/32”. Fits all Vision T-slot tables.

SMALL SELF CENTERING VISE

For use with Express, VE810, Phoenix 1212, 1612 and the 1624

This fixture allows you to hold various small items such as nameplates. Dowel pin settings allow this item to work with most Vision fixtures for even more versatility.

UNIVERSAL CLAMPING BARS w/MEDALLION HOLDER

These clamping bars hold small flat items, including name badges with pin backs, securely. By rotating the clamping bars they will hold 1 to 3 round objects at a time. This allows you to engrave multiple notary seals, coasters, paperweights, and a variety of other circular items. With a place for the “eye” of medallions, this clamp adapts to any vise or table that has a T-slot system.

SELF-CENTERING DEEP VISE

This vise can be used with the VE-810XD and the VE-810 or the Phoenix 1212. The self-centering design allows easy setup of odd-shaped items up to 3 1/4" deep.

RING ATTACHMENT

This fixture allows you to engrave around the inside and outside of most rings or other cylindrical objects.
(Compatible with the MAX and Max Pro.)
Min. Dia: 5/8" Max Dia: 4"

PEN & MEDALLION FIXTURE

This is a double-sided fixture that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal, or other circular item. With a space for the “eye” of the medallion, this fixture is usable with the Versa Vise or Quick-Lock vise. Fits all Vision T-slot tables.

PUSH-DOWN CLAMP

This double-sided clamp secures items from the edge. It is ideal for items that are being cut, contoured, or engraved. Fits all Vision T-slot tables.

UNIVERSAL PIN FIXTURES

Available for the Versa Vise, Quick-Lock Vise, Vision T-slot table, and Self-Centering Vise. These fixtures enable engraving on all unique-sized pens, lighters, knives, key-chains, and many other irregular-shaped items.

MULTIPLE UNIVERSAL PIN FIXTURE VISE

This combination of a Versa Vise and three universal pin fixtures enables quick and easy setup for engraving multiple items of various shapes. Fits all Vision T-slot tables.

VERSA VISE II

The Versa Vise can be used alone or in conjunction with other fixtures to hold a variety of shapes and sizes.

SEAL FIXTURE

This fixture enables engraving on 1 5/8" & 2" diameter notary seals, medallions, coasters, paperweights, and other round objects. Can be used with the Quick-Lock or Versa Vise. Fits all Vision T-slot tables.

QUICK-LOCK VISE

This vise is specifically designed for T-slot table users. Its “cam” type locking device allows for quick changing of parts. Supplied with a removable front clamping plate which allows for holding thicker items. Fits all Vision T-slot tables.

PEN ENGRAVING KIT MAX & MAX Pro ONLY

This fixture allows you to engrave around the outside of most pens with the MAX & MAX PRO Engraver.

ADJUSTABLE PEN FIXTURE

This piece of engraving equipment enables engraving on most sizes of pens and cylindrical items that vary in diameter from end to end. Available for most computerized engravers. It is also usable with the Versa Vise and Self-Centering Vise. Fits all T-slot tables.

QUICK-LOCK LEATHER BRACELET AND KEYCHAIN VISE

This piece of engraving equipment is specifically made for engraving leather bracelets and keychains. Designed to work with any Vision T-slot Table, it features a removable front clamping plate with a "cam" type locking device.

BOTTLE ADAPTER

For use with Max and Max Pro engraver only.