ENGRAVER – VACUUM CHIP REMOVAL SYSTEM

Quiet 1/3 HP Vacuum pump for removing engraving material chips that collect while engraving. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and flexible hose.

ENGRAVER – TABLE STAND

Heavy duty steel construction. Casters purchase required in order to have a rolling table stand.

ENGRAVER – T-SLOT TABLE

Aluminium construction; necessary to accommodate any of the wide variety of holding fixtures that vision offers. Includes the handy Quick-Lock Vise. NOTE: Only needed with 2424 or 2448 Engraver Models.

ENGRAVER – DIAMOND DRAG ADAPTER

For scratch engraving, common with brass, aluminium, pewter and stainless steel. Screws onto the end of most any spindle, includes 120”diamond insert.

ENGRAVER – BURNISHING ADAPTER

Simple to use ËZ-Rider” Burnished. Enables you to burnish lacquered brass and anodized metals with just the right amount of pressure.

ENGRAVER – SELF-CENTERING DEEP VISE

Allows engraving of large and unusual-shaped objects. Commonly used with the VE-810XD but can also be used with the Phoenix and Vision tables that have height risers installed.

ENGRAVER - ADJUSTABLE HEIGHT RISER BLOCKS

Provide an additional 2 inches of clearance under the engraving spindle in order to accommodate taller items. Includes 3 different spacers which can be used individually or cumulatively to rise the gantry.

ENGRAVER - THE VISION ROTARY ATTACHMENT

Now you’re not just limited to engraving length wise on your pens, cigar holders, miniature baseball bats or other cylindrical items. With the new Vision Rotary Attachment, you can engrave around the entire circumference! Compatible with any Vision Engraving System that has the Series II or 3 Vision Controller, it can hold items up to 1.5” in diameter and up to 7” in length.

ENGRAVER - HIGH-FREQUENCY 60,000 RPM

Deep engrave into metals up to 3 times faster! This spring-loaded spindle option with floating nose cone allows for consistent depth engraving into hard materials. The high RPM allows cutter to stay sharp much longer for increased production. The RPM is adjustable manually with the included control box or through the Vision Series 3 controller. The spindle comes standard with a 3 mm collet.

ROUTER – ENGRAVING HEAD

Get the best of both systems… use an engraving head for detail work and a router head for cutting and profiling.

Includes ¼” Top and Bottom loading collet spindle.

ROUTER – DUAL CARRIAGE

Double your production with a second carriage. Great for dedicated use of a table when the application is less than half the width of the engraving area. Carriage only requires a second spindle or router head

Photo shows one high-frequency head and one engraving head.

ROUTER - VACUUM CHIP REMOVAL SYSTEM

Quiet 1/3 HP vacuum pump for removing engraving material chips that collect while engraving. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and flexible hose.

ROUTER – HIGH FREQUENCY DIRECT DRIVE SPINDLE

Available in either 2.0 or 3.0 HP. Both include ¼” collet high-frequency inverter drive.

ROUTER – HIGH FREQUENCY 60,000 RPM

Deep engrave into metals up to 3 times faster! This spring-loaded spindle option with floating nose cone allows for consistent dept engraving into hard materials The high RPM allows cutters to stay sharp much longer for increased production. The RPM is adjustable manually with the included control box or through the Vision Series 3 controller. The spindle comes standard with a 3 mm collet.